Blog

Heating and Air Condition Service in Plano, TX: Don’t depend on fly by night operators

Heating and Air Condition Service in Plano, TX: Don’t depend on fly by night operators

There are a few relatively basic steps in the heating and air conditioner servicing process that, if followed correctly, can also help ensure that your HVAC or just AC unit works fine, day in day out. Let us go through a few of these steps so that one can also know just when the expertise of an expert in Heating and air condition service in Plano, TX is required and what it is, that you can do to be able to refrain from calling in the true blue experts in this particular field.

However, here it is especially pertinent to note that most issues and problems that are typically related to Heating and air condition service in Plano, TX require the attention of an expert, in this field. Indeed, this is exactly why you should also refrain from any DIY (do it yourself) attempts just in case you end up making a bad situation even worse, then it had ever been before.

Thanks to the recent advancements in cutting edge climate control technology, now it is entirely possible to thoroughly clean and service a heating and air condition system easily enough, without doing anything extra, at all. This is because quite a few modern split AC units are suitably well equipped with a much needed heating option as well. Thereby make ideal complements for the time when you will need to use both in mid summers as well as mid winters. This means you can also acquire the ‘best of both worlds’ very effectively once you decide to have your HVAC (or for that matter even a simple AC with heating function) system suitably well serviced by professional and skilled technicians. Some of the many steps involved in Heating and air condition service in Plano TX, may include the following:

o   Cleaning the blower thoroughly

All HVACs and even their relatively simpler air conditioner counterparts, are equipped with a powerful fan or blower (as it is referred to in the industry). If this blower clogs up with layers of dust and grime, the odds are that it will fail to do its work efficiently enough. This in turn, will mean that it will suck in considerably more power from the entire system. In the long run there is even an off chance that it just might short circuit, as well.

While it is entirely possible for a layman to both open it and clean it up to a reasonable degree, but nevertheless such impromptu cleaning efforts might not be deemed sufficient enough, for the job at hand. This is due to the fact that very few individuals (apart from HVAC technicians) have the ability of being able to clean it as thoroughly as required.

Here, just simply running a soft dry cloth over the blower will not be considered enough at all, but rather this vital component of the HVAC system it has to be properly cleaned with the help of air blasting, courtesy a really high powered blower.

Once the dust has been loosened enough, then the grime particles should be vacuumed immediately with the help of an equally high powered vacuum cleaner. Once the machines have done their work, it is down to a bit of ‘elbow grease’ to complete the task at hand. By which it is meant, that the blower and its surrounding casing should be well cleaned with a wet cloth that has been filled with a powerful anti-corrosive detergent, then subsequently drip dried and finally the blades as well as the inner mechanism should be oiled lightly to ensure there is no rusting of the same.

However, all due care has to be taken to ensure that there is no seepage of water into the main motor itself. Otherwise it can lead to a potential short circuit. Such cleaning is a vital aspect of Heating and air condition service in Plano TX.

o   Cleaning the condenser coils

The condenser coils are vital components in an HVAC system chiefly because they carry the ambient refrigerant gas and are also more or less directly responsible for ensuring that the temperature in the room is maintained properly, as per the desired settings on the thermostat. These coils or fins can easily be cleaned by forcing of high powered jets of water both on, and in between the coils.

They are then blow dried with the help of really powerful blowers. It is deemed necessary to include the condenser fins and coils in Heating and air condition service in Plano, TX, because a really dirty set of condenser coils will not only clog up the airways of the whole HVAC system but they will also decrease the ambient pressure of the airflow in the structure that is being climate controlled by the HVAC system. However, it is important that all due care has to be taken to make sure that the really thin and delicate coils are not bent out of shape during the entire cleaning process while conducting Heating and air condition service in Plano, TX.

o   Routine check ups

All the important electronic parts such as the compressor, the various connections, the thermostat, breakers, and fuses should also be subjected to at least a cursory checking to make sure that they are all working completely fine. This is also a key component of Heating and air condition service in Plano, TX.

It is possible for you to acquire a whole lot more information on Heating and air condition service in Plano, TX by getting in touch with the real ‘true blue’ experts in this field, i.e. the excellent people at K&S Heating and Air who have a really good track record when it comes to Heating and air condition service in Plano, TX. They can be contacted at https://kandsac.com/