Steps to Follow Before You Turn on Your Air Conditioner Again | Air Conditioner Repair in Dallas, TX

Residents of the Dallas, TX area will currently be experiencing winters and the furnaces and boilers would probably be in use with full flow. While the weather currently might not prompt you to turn on your air conditioner, it does not mean that you may not require your air conditioner ever again in the future.

Your air conditioner is an important part of reducing the impact of the heat outside within your home. With proper air conditioner repair in Dallas, TX you can maintain this accessory to last a good period of time without regular problems.

One common problem experienced by homeowners is that they face a certain level of unresponsiveness from their air conditioner once they turn it on after the long hiatus in the winters. The air conditioner may not respond to you turning it on and will indicate that something is amiss within. Recognizing the need for guidance in this regard, we have come up with a possible list of steps you can follow or things you can check to ensure that the break during the winters didn’t outdate your equipment and that the air conditioner is good to go.

While all of us will be too engrossed in the cool weather outside to note that our air conditioner requires maintenance, it is imperative to check on them regularly, so that you don’t have to sweat once the summers arrive in full flow. Thus, your air conditioner needs to be in full flow when you eventually have to seek relief from the scorching sun outside. To ensure that the air conditioner is all set to operate after the long break, there are certain steps you should follow during the winters, when the air conditioner is usually off.

Checking for air conditioner repairs in Dallas, TX now is a flawless idea as you can carry out simple repairs handled by a professional before the weather starts getting warmer. But, before we go on to these simple steps, it is pertinent for you to know these 5 air conditioner terms.

  1. Air Conditioning: An absolute control of humidity and temperature by removal of moisture through condensation.
  2. Compressor: Component needed for changing refrigerant with low pressure into refrigerant with high pressure.
  3. Evaporator: Component where all the liquid refrigerant changes states and passes around as gas to absorb heat from the air present inside.
  4. Condenser: A component that looks like a radiator, where the refrigerator gives out its heat when it is changing states.
  5. Filter: A device that is used as a separate unit or with the drier to remove or take out any external substances

Since homeowners do not know the intricate details attached with their air conditioning system, there can be a certain level of confusion in understanding these concepts. This is why we have distributed all that you need to check based on a more understandable metric of indoor and outdoor air conditioning equipment.

Things to Check in Indoor Equipment

You need to begin checking all indoor equipment with your thermostat in the off position. The temperature should ideally be turned to a high setting, usually around 80 degrees, after which you should check the following:

  1. Go Through the Thermostat: Is the thermostat that you are currently using outdated? Do you think that you should need a new one? Also, you will start saving energy and some extra costs if your thermostat is up to the mark and does its job well. If you see some alterations in the settings for the thermostat, call for an air conditioner repair in Dallas, TX to take care of this.
  2. Check for Exposed Ductwork: Once you have gone through the thermostat, you need to check any open exposed ductwork for wear and tear. Any wear in the exposed ductwork can eventually be a source of inefficiency with the loss of cooling in the home.
  3. Look at Air Vents: Thoroughly inspect all air vents and see if there are any items that are blocking the flow of air. You might have an accumulation of sediments that may require some attention.
  4. Check the Drain Line: Most conditioners have a drain besides the indoor cooling coil. This drain is typically mounted above the furnace in your basement. When drain line gets clogged, the water that is coming in forms a serious accumulation. The accumulation of water in this line can have serious damages on the structure of your home. It is good to have an air conditioner repair in Dallas, TX every once a while to clear the drain lines.
  5. Air Filter: Your air filter is another important part of the conditioner that should preferably be changed once in every three months. This repair is definitely required before the start of a cooling season. Get an air conditioner repair in Dallas, TX to change your air filters.

Checks in Outdoor Equipment

As important as it is to check the indoor equipment, outdoor accessories should also not be compromised when it comes to ensuring the safety of your conditioning system. Here are things you should check before the change of seasons.

  1. Inspect the Condenser Unit: While inspecting this unit, ensure that you have no blockage near the equipment. A professional cleaning can be done by getting an air conditioner repair in Dallas, TX.
  2. Inspect the Refrigerant Lines: The refrigerant lines should all be properly insulated. You can visually check these lines. Neglect in ensuring the safety of these lines can often prove expensive and costly. These lines should be checked by a professional.
  3. Know Your Conditioners Age: Regardless of how many times you have an air conditioner repair in Dallas, TX it is imperative to know the age of your conditioner. Every unit has a certain life span that should not be exceeded.

Keeping a check on all these equipment before the summer season starts is necessary. It is better that you diagnose all problems and get an air conditioner repair in Dallas, TX now, rather than waiting for the summer to strike in full flow.

Request an
Appointment