Blog

Common Causes For A Heating And AC Repair | Dallas, TX

Common Causes For A Heating And AC Repair | Dallas, TX

Photo By monkeybusinessimages at istock

The heating and AC system in your house has many components. Some are more important than others but they all work together to treat the air in your home so that it remains at the desired temperature. Since there are so many components in these systems, there is a chance that you will need heating and AC repairs. There are a few common things that will cause your heating and Ac system to malfunction. K&S Heating & Air in Dallas, TX would like to give you more information about the common problems that can occur in your heating and air conditioning system.

Thermostat Problems

The thermostat allows you to set the temperature that you want your home to be. This thermostat will send the information to the furnace or air conditioner unit so that these appliances know how much treated air they should produce. If your home is not getting hot or cold enough then there might be a problem with your thermostat. The thermostat could be faulty and it might need to be replaced. In other cases, the thermostat is not calibrated correctly so it does not send the correct information to the furnace and air conditioner. You could calibrate your own thermostat but if you are struggling to make sense of the manual then you can have a heating and AC repair technician assist you.

Dirty Air Filters

Air filters are important because they prevent dust and dirt from entering and exiting the duct system. These air filters also trap the dust so that it is not circulating in your home. If you have dirty air filters then you could be constructing the airflow which means that your systems are not working as optimally as they could. This will increase your utility bill and place more stress on your systems. It is recommended that you replace your air filter at least once every six months but you should keep an eye on them. If they get dirty within the first month then there is a possibility that your ductwork is full of dust. If this is the case then should hire an HVAC technician to remove the dust and debris from your ducts. If you fail to do this then your system will experience excess wear and tear which could damage components. It is better to hire duct cleaning services rather than heating and AC repair services.

Lack of Maintenance

A lack of maintenance is one of the most common causes for heating and AC repairs. During the winter and summer, your heating and air conditioning system works all the time to keep your home at a comfortable temperature. It is best to hire your heating and AC repair technician to inspect your system before summer so that they can repair or replace any faulty components. This will prevent your air conditioner from breaking down when you need it the most. Regular maintenance is also more cost-effective than expensive repairs. You should get an HVAC technician to inspect your furnace during autumn. This will prevent the furnace from breaking down during the coldest part of the year. Winter and summer are also the busiest times of the year for HVAC technicians so if your systems break down then you might struggle to find a service provider that can fix it for you in a reasonable time frame.

No Ignition

If you have a gas furnace then your ignition system is responsible for igniting the gas so that the heat from the fire can heat up the air. If you notice that your furnace is not turning on then there might be a problem with the pilot light. K&S Heating & Air in Dallas, TX recommends hiring a professional to take a look at your pilot light instead of doing it yourself. If a gas leak arises then you could be putting yourself and your home at risk. The pilot light can also experience dust build-up which will prevent it from setting the gas alight. You should have a technician conduct regular maintenance so that they can clean the pilot light so it does not cause problems in the future. If you have an electric furnace then you do not have to worry about this problem but you should get a professional to inspect the heating element if your furnace is not producing hot air.

Refrigerant Leaks

The refrigerant is the chemical that is responsible for drawing out the heat and moisture from the air in order to cool it down. Refrigerant is a toxic substance that could negatively affect your health. If you suspect that you have a refrigerant leak then you should hire a service provider to conduct heating and AC repairs. The technicians will either seal the leak or they will have to replace the evaporator coil. These repairs are complicated which is why you should leave them up to a professional. The technicians can also inspect the condenser coil as well as the drain line to make sure that they are also in working order. If you see water pooling by your air conditioner unit then it could be a clogged drain line or it could be refrigerant that leaked out.

These are some of the problems that can occur and they require you to hire heating and AC repairs. If you would like to avoid paying for heating and AC repairs then you should have regular maintenance done to your system. K&S Heating & Air will be able to help you with heating and AC repairs as well as any other service that you might need for your furnace or air conditioner.

To schedule an inspection of your system, contact K&S Heating & Air in Dallas, TX.