Blog

Air Conditioner Installation in Farmers Branch, TX: Not a DIY Job at All

Air Conditioner Installation in Farmers Branch, TX: Not a DIY Job at All

If you have decided to install a split unit AC in your home, then you should also do well to realize that it is not really an easy task. Furthermore, it should only be performed with the help of highly skilled and experienced experts in Air Conditioner Installation in Farmers Branch, TX. This is because it is only these people who will be able to ensure that your Split AC unit remains fully functional and is alsoable to perform well, year after year.

If you were to try and do it entirely on your own, than the odds are that you might bungle up the whole thing, due to the myriad intricacies involved in the operation, especially as far as split AC units are concerned. Let us see how a top notch pro in Air Conditioner Installation in Farmers Branch, TX will go about doing the needful in such a manner that the unit does not give any grief for many summer seasons.

o  Installation of the outdoor condensing unit (where split AC’s are concerned)

The outdoor unit of your brand new double invertor split AC must always have at least 6 inches or so, of ground clearance, at the very least. This will ensure that the hot air being removed from your room will not be obstructed and the unit will give optimum performance. Apart from that, it should also be installed in both an airy as well as a suitably well ventilated area, per se. By which it is meant that the unit should also be placed as far away as possible from direct sunlight and other harsh elements found in the surrounding environment as well.

This has to be done so that it functions perfectly well, day in day out. Moreover, it is of great importance for you as the owner of the unit to get the experts responsible for Air Conditioner Installation in Farmers Branch, to thoroughly check and double check all of the pipes and wires along with all of their associated air ducts that are responsible for carrying cold air to the room and removing the hot air and releasing the same into the external environment. This has to be done to ensure the fact that these ducts and pipes are securely connected and there is no chance of any leakages or exposed wires, whatsoever.

Here, it is imperative to point out exactly how important it is to make sure that these exposed and bare wires should be taken care off, by highly trained professionals well skilled in Air Conditioner Installation in Farmers Branch, TX. This is due to the fact that an exposed or bare wire that carries the power required to run the entire split unit can be really very dangerous, to say the least. And should anyone inadvertently touch it, he or she will be liable to receive grievous injuries, or even worse. Indeed, this is precisely why you should only ask the real experts in Air Conditioner Installation in Farmers Branch, TX to thoroughly check and double check each and every one of the electricity wires, plugs as well as sockets before they leave, after installing the device.

Once the external unit has been placed you have to make sure that the specialists you hire for the task of Air Conditioner Installation in Farmers Branch, TX have sufficient knowledge of masonry to be able lay a concrete platform that will be able to act as a base for the external unit of your split AC.

This base pad or base plate has to be laid in such a manner that it will be more or less level, with the ground itself. Furthermore, this base has to be suitably high enough so that the outdoor unit will not be affected by the strains of inclement weather such as rain and sleet or even a winter snowstorm that could easily pile up the snow to such an extent, that it actually enters the main unit, itself. This will help prevent both rusting as well as weather related decay of the metal parts, of the machine.

However, should you just go ahead and ask the professionals responsible for Air Conditioner Installation in Farmers Branch, TX to just simply raise the platform, they will be sure to do the needful and this will also effectively eliminate the need to sweep and clean the area immediately around the around the condensing unit.

o   The Installation of the indoor unit

The professional who are adept at Air Conditioner Installation in Farmers Branch, TX will themselves look for and find the best possible place to install the indoors unit. While they will be polite enough to ask for your input, it is considered standard best practice to allow them to do decide the location on their own, without let or hindrance. Here, it is pertinent to note that one should try and avoid any direct sunlight as well as any other heat sources present immediately in front of the indoor unit.

As with the outdoor unit, so too with the indoor one in the sense that the AC’s indoor unit should have at least 6 inches or so, of open space, in the immediate surrounding area of the unit. Moreover, the unit itself has to be firmly mounted on its own mounts that have been affixed to the wall with hex nuts and bolts. It should be placed around 84 inches above the ground level of the room.

However, you should keep in mind that this is just an average setting and your chosen experts at Air Conditioner Installation in Farmers Branch, TX will know how to make the right decision regarding the overall height of the unit. In fact, the unit needs must be placed well above doors and windows so that sunlight does not interfere with the air stream emanating from the blower and thereby affect the unit’s cooling capacity.

If you have any questions with regard to your AC’s installation, service and even repairs then all you have to do is to call the well -tested and time proven experts at https://kandsac.com. Rest assured that when it comes to Air Conditioner Installation in Farmers Branch, TX, they are amongst the top outfits in their field in Farmers Branch TX.