Heating And AC Repair With K&S Heating & Air | Rowlett, TX

Heating And AC Repair With K&S Heating & Air | Rowlett, TX

Photo By

Many people take heating and AC for granted, but the truth is that these are very important within a residential or commercial building. Because of this, it can be incredibly frustrating when heating and AC don’t function properly. However, you don’t have to worry, because there are heating and AC repair professionals who can help you when this situation arises.

Common Problems Necessitating Heating and AC Repair

There are many common problems that happen with both heating and AC systems. An HVAC professional can help with the vast majority of these issues.

Poor Maintenance

In order to prevent the need for unnecessary and expensive repairs, regularly scheduled maintenance is a must. If you don’t perform regular maintenance, it’s very likely that you are going to experience poor performance, higher energy costs, and a lot of frustration with your system.

Clogged Filters

It is very important that you replace your HVAC filters on a regular basis. This is one of the most crucial things that you can do to maximize the lifespan of your furnace. If the filter is dirty, airflow will be restricted, which will cause your unit to have to do a lot more work to be able to circulate the same amount of air throughout your home. This will put a lot of unnecessary strain on the blower of your furnace and can also result in overheating and a complete shutdown.

Problems with the Ignition or Pilot

There are a number of issues that can cause ignition problems. These include problems with a flame sensor, dirty pilot, or burners. These can lead to short cycling, pilot outages, or delayed ignition of burners. In some cases, it could be the result of some sort of gas supply issue or wear and tear on a component of the ignition.

No matter what the specific cause, the best thing to do is bring in a heating and AC repair professional to tackle the issue. You should definitely not try to tackle the issue yourself because you would have to deal with very dangerous elements, such as high voltages and natural gases.

Faulty Thermostat

There is a large amount of variation in HVAC thermostats. They can be non programmable or programmable, for example. A lot of the time, when someone believes that their furnace is not operating correctly, it is because of the thermostat or the settings of the thermostat.

It’s good to know, for example, that if you have a programmable thermostat, there is a chance that it may have batteries that simply need to be replaced. If it is still malfunctioning after you have made a reasonable effort to figure out what is wrong, then it might be time to bring in a heating and AC repair technician in Rowlett, TX.

Mechanical Wear and Tear

Your HVAC system depends on many different mechanical parts for its operation. These parts undergo wear and tear over time, and this can negatively influence the performance of the entire unit.

Strange Noises

There are many noises that your furnace makes that are part of normal operations. However, there are others that are indicators of serious problems. For example, if you hear a squealing or whining coming from a motor, this likely indicates that the blower motor or inducer blower is failing. In these cases, you might have to replace the motor in order to prevent a complete failure of the furnace. There are other noises that can result from dirty burners or airflow issues.

If you hear these kinds of noises, you should pay attention, as they could be warning you of some sort of dangerous operating condition and could even lead to failure of the furnace.

Tripped Breakers or Blown Fuses

If a furnace trips a circuit breaker, this is most commonly because the blower is overexerting itself, due to a blockage in the system (usually because of a dirty air filter). If replacing the filter doesn’t fix the problem, you can contact a heating and AC repair professional to see what the cause is.

Dirty Condenser or Evaporator Coils

If there is debris in your HVAC system, the coils can become clogged and wear out your machine. You can clean off the coil after shutting off the power that goes to the condenser. If the evaporator coil is dirty, this can reduce the efficiency of the system. If the coil is extremely dirty, you may have to call in a heating and AC repair professional.

Continuously Running Blower

There are a few different causes for a continuously running blower. Before you call a heating and AC repair technician, you should check the fan switch that is located on the thermostat. If the thermostat is set to the fan on position, the motor is going to run continuously.

There is a fan relay within the furnace that will turn the blower on when you call for heat. If the relay sticks, the blower won’t shut off. There are several different types of limits and safeties on the furnace. A trained professional can evaluate the issue if you are not able to figure it out yourself and give you different options.

Water Leaks

High-efficiency furnaces and air conditioners produce condensate. They also use drain pipes to dispose of the water. If the drain lines are cracked or clogged, the furnaces can leak. Homeowners can do their part to keep the drain lines clean by pouring bleach down the drain every so often. However, there are other potential sources of leaks. A professional should be called in to determine the source of more complex leaks, as well as any repair options.

The Takeaway…

As you can see, there is a lot of thought that goes into hiring a heating and AC repair professional or company. If you are located in the city of Rowlett, TX, you have great options at your disposal, one being K&S Heating & Air. The professionals at this company will not let you down and we’ll be able to take care of any heating and AC repair needs that you have.