Your air conditioner thermostat is a small instrument but it plays an important role in ensuring your everyday comfort and in keeping your home’s heating and cooling costs low!
If you too have an HVAC system installed in your house then you must know some of the common thermostat problems which arise every now and then, causing the trouble of calling the professionals for air conditioner repair in Frisco, TX. While some of the thermostat associated problems are repairable and easy to handle, others might be really difficult to tackle and should only be left to professionals.
Hence, hiring the services of a professional air conditioner repair in Frisco, TX is always a good idea rather than attempting the repair as a DIY project. Moreover, you must get your air conditioner checked, as you enter into summers to avoid the issues at the eleventh hour.
For your assistance, in this article, we will be discussing the three major thermostat problems, along with some common myths attached to it. So, let’s get started!
Room temperature and thermostat settings are never inconsistent
According to the professionals of air conditioner repair in Frisco, TX, the most fundamental reason for this issue is the excessive build-up of grime which causes inconsistencies between actual room temperature and temperature settings. Another reason for this temperature inconsistency is the poor installation of the system. Indeed, the good part is that both of these problems are easily fixable with proper maintenance and with the assistance of a professional air conditioner repair in Frisco, TX.
Frequent running and short cycling
This problem arises when the thermostat is not leveled or probably dirty from inside which triggers continuous operation or short cycling, eroding energy efficiency. Another cause of this issue is the poorly calibrated anticipator. However, your best bet is to get your unit checked by hiring the services of a reputable company providing air conditioner repair in Frisco, TX to know how fast thermostat is responding to temperature change.
Thermostat stops working
If you face this issue, check if the thermostat display is still lit. This is because if the display is not lit, the thermostat will not signal your air conditioner to switch ON. Look for the reasons behind the improper power consumption of thermostats such as a tripped breaker, dead batteries or blown fuse in the electrical panel. The professionals of air conditioner repair in Frisco, TX suggest that you must check the internal components of the thermostat too and make sure it’s free of soot, dirt, dust or cigarette smoke.
While the above-discussed are just the three common problems of the thermostat, let us now look at some of the myths attached to the thermostat and its functionality, causing more damage to your air conditioner than any good.
Myth #1 – Keep thermostat on while you remain away to save some money in terms of energy bills
Many people believe that if you keep the thermostat adjusted at a particular temperature, while you are away, it will help in reducing your energy costs. They believe if they switch ON the thermostat after returning home, the thermostat will have to work harder to maintain the desired temperature and this will be a waste of energy.
According to the professionals of air conditioner repair in Frisco, TX, you can save almost 1% in terms of the energy bill, for each degree, that you adjust during the setback period of almost 8 hours or longer. The saving may be even more if you reside in an area having a mild climate.
Myth #2 – Keeping the thermostat at a much cooler or hotter temperature will help to reach your desired temperature faster
Many people assume that if you like your home to heat instantly, you must set your thermostat at the highest possible temperature as this will cause the HVAC system to blow the hottest air. They also believe in the same practice in the case of cooling down space much faster.
The truth is that your HVAC system does not really work like that. The heating and cooling mechanism of the thermostat continues at a uniform rate, regardless of what temperature you may set it to. Hence, as per the professionals of air conditioner repair in Frisco, TX, the only thing that is achievable by keeping this improper temperature adjustment of your thermostat is discomfort, much higher energy cost and frequent break down of the thermostat.
Myth #3 – The improper temperature in your house indicates a broken thermostat
Well, this may be true but only if we consider that the batteries used in thermostat are dead. Otherwise, there could be many reasons behind an improper temperature of your air conditioner including, dirt or dust within the thermostat, leaky ductwork, cooling or heating unit is off, cooling or heating unit repairs, maintenance or replacement need, incorrect setting of a fan or similar other factors.
As per the experts of air conditioner repair in Frisco, TX, one of the reasons of this could be the loose wires or corrosion that may lead to malfunction. So, if you think that your thermostat has passed its useful life or outdated, then your best solution is to get it replaced by a company providing air conditioner repair in Frisco, TX.
Myth #4 – The installation location of thermostat is not important
This is a common belief and a wrong one! The location of your installed thermostat significantly affects its functionality, which in turn, affects your comfort and energy bills. The thermostat should always be installed away from direct sunlight, doorways, drapery, drafty areas, vents, appliances or kitchen. In fact, they should be installed at some spacious and convenient location including close to the room where optimal comfort is desired.
Conclusively, if your thermostat is not working properly and needs to be repaired then choose only the best professional of air conditioner repair such as offered by K&S Heating. Their team of professionals is well-versed to handle complex thermostat or HVAC system problems. Moreover, you can also get their assistance after the work done, by calling on their emergency number or in case of facing any emergent situation in terms of an improper function of your HVAC system.