We only realize the importance of the furnace during the winter or in the days that are nearing the cold season. After all, it is the furnace that provides us with warmth and refuge from the biting nature of the cold weather.
A furnace is a home appliance that has been known to provide heat to a home or building. It is derived from the Greek word for oven. That is because this appliance perfectly delivers the feeling of being in the oven, which is really helpful when you think about the terrible winter weather.
This machine is incredibly important for the winters since the cold winds can make it impossible for the humans to perform their everyday tasks. Other than that, the warm weather inside the house could stop the pipes from bursting as well.
But, you need to keep in mind that the furnace is not functioning for a long time and tends to remain idle during the summer time.
This could lead it to encounter some damages to its hardware which will make it useless during the winter. When such an issue arises, you will have to call the heating and air conditioning services in Garland, TX.
It is best to look for the problems before the winter starts so you can get your furnace fixed immediately:
It is normal if your furnace releases smell that is similar to that of the fuels poured into them. This can happen especially if they are being turned for the first time in months. However, you need to be alert that the smell should dissipate as soon as the unit starts running constantly, otherwise it could mean trouble.
If you feel that the scent is getting stronger than usual, or appeared out of nowhere and would go away then it means that there is an issue within your furnace. You will have to call the heating and air conditioning services in Garland, TX, immediately. This could very well mean that there is a gas leak in the unit or there is dust present in abundance. Call an expert from a heating and air conditioning service in Garland, TX.
Difficulty in starting the unit
This is pretty obvious, isn’t it? Your heating unit should start immediately and smoothly. But if you are facing a problem when you attempt to turn on the furnace then you need to call a heating and air conditioning service expert as soon as possible. Other than a hesitant startup, another problem that you can face is that the furnace could shut down without being prompted to.
If your furnace is shutting down automatically and it takes you a lot of struggle to start it up, then it is time that you either get it repaired or buy a new one. This could mean that the wiring in the system is faulty or the thermostats are damaged, at the moment. You can immediately call the heating and air conditioning service in Garland TX. Do not try to fix the problem yourself, the root cause of the issue could be bigger than you anticipated.
The color of the pilot light
Sometimes the makes of the furnace might try to help in you detecting the problem as well. A normal light at the startup would either be blue or green. You can confirm the color of the light with the manual that comes with the furnace itself. If you find that the furnace pilot light is yellow or red, then there is surely some issue with the unit.
One of the major reasons that the light may turn red, that is the usual color that indicated some fault, is that the carbon monoxide present in the machine is not being dispelled soon enough. This is when you call the heating and air conditioning service in Garland, TX. Please do not try to go digging into the appliance yourself, one wrong move and you could be putting yourself, and those who live you in danger. Other than that, prolonged ignorance of the warning could mean that the unit may combust any time putting you at high risk of fatality.
This may take you a while to figure out but once you become a bit more alert you might be able to deal with it. If your furnace seems to be producing little to no heat and you have tried to adjust the thermostat several times then you may need to call the heating and air conditioning service in Garland, TX, immediately. Also, if you feel that the room is warm for a few minutes and then cold for the next few then this is another indication of a problem.
It could mean that there is a problem with the ductwork, the feature responsible for letting out the air from the furnace into your room, or that your thermostat is not reading and sending the commands that you are giving it.
The older the furnace becomes, the more noises it makes. This is the indication of its aging, and to you, it is a sign that you need to engage in its maintenance or buy a new one. A squealing sound could mean that there are issues with your motor bearing that need to be fixed. Banging or rattling sounds could mean that there is a problem with the motor. If you hear a loud rattling sound when the fan starts, it usually represents a motor that is failing and you need to immediately call the heating and air conditioning service in Garland, TX.
It is best that you turn on the furnace during the late autumn to look for any faults to be repaired. It is best that you get it checked and repaired now for the winter, rather than suffer later.
Contact the experts at K&S Heating & Air today.