Top Reasons for AC Water Leakage and Why Air Conditioner Repair in Frisco, TX is Important to Fix it
Not many homeowners consider the need for air conditioner repair in Frisco, TX when they see water leakage from their units. This is typically because they consider water leakage to be normal. After all, that’s how AC systems function.
Well, it’s true that the condenser of the AC releases water when it runs. However, what may trigger the need for air conditioner repair in Frisco, TX is the amount of water leakage. Some amount of water leakage from the air conditioning unit is normal but too much of it is not. If you notice an abnormal volume of water leakage from your unit, schedule air conditioner repair in Frisco, TX right away.
When is the Water leakage from the Air Conditioning Unit Too Much?
There is a fine line between water leakage that is considered to be normal and when repairs might be needed. So, when is the water too much? Well, if your air conditioner releases water when running and that water is only the size of a small puddle which dries up quickly on hot summer days, then this means your system is functioning normally and you don’t need air conditioner repair in Frisco, TX. However, the need for repair occurs when the water leakage is consistent and lasts all day long.
Now let’s take a deeper dive to learn the top reasons for AC water leakage and why is it important to consider air conditioner repair in Frisco, TX to fix this problem immediately:
1. Condensate Drain is Blocked or Clogged
The condensate drain is a small sized dripping line that plays a crucial role in ensuring your AC functions properly. The purpose of the condensate drain is to remove condensation that is produced by the evaporator coil of the air conditioner. If this line is not cleaned and serviced regularly, it can get blocked. It usually gets clogged because of rust, algae, debris or dirt.
When the condensate drain line gets blocked, results in the air conditioning unit’s drain pan to overflow. And this leads to AC water leakage. Look, the drain pan basically is located under the air conditioning unit. This pan catches water created by the unit. However, when the drain line and pan become clogged due to algae or dust accumulated inside it, the water begins to overflow resulting in water leakage, excessively.
2. Drain Line is not connected properly
Air conditioner repair in Frisco, TX may become necessary if the water leakage from your air conditioner is due to the improper drain line fitting. This usually happens because of poor air conditioning system installation.
If the air conditioner is not properly installed, the drain pipe fitting may loosen with time. This causes the line to disconnect from your AC unit and the condensate to leak water on the floor and through the ceiling. When this happens, it is important to call experts for air conditioner repair in Frisco, TX to avoid further damage.
3. Dirty and Clogged Air Filters
Unfortunately, air filters are the most neglected part of AC units. And as they are often neglected during servicing, it’s not surprising at all to learn that they get clogged due to the accumulation of dirt and dust. When air filters get dirty, it leads to formation of ice on the evaporator coils. This happens predominantly because the buildup of dirt and dust blocks the flow of air and it fails to reach the evaporator coils.
As a result, the coils become cold and freeze up. When this ice melts, it drips water. And since the drain pan is not designed to hold extra amount of water, thus results in water leakage. In such a situation, it makes sense to schedule for air conditioner repair in Frisco, TX and call in experts to get your air filters checked.
4. Refrigerant Level is Too Low
Another reason for AC water leakage is the low level of refrigerant. This is basically a chemical that produces temperature fluctuations when exposed to different types of pressure conditions. It transitions from gaseous state to liquid and then back to its original form as it moves and circulates swiftly through the evaporator coils and the compressor. The refrigerant level must be checked during AC installation. It needs to be sufficient to ensure optimal performance of the air conditioner.
If the level of refrigerant is lower than normal, the evaporator coils become cold and eventually freeze. And when they melt, the drain pan overflows with water and it then begins to leak.
The two common reasons behind the low levels of refrigerant are poor AC installation and refrigerant leak. Refrigerant leak can because of formicary corrosion of the copper tubing that contain refrigerant.
No matter what the reason for AC water leakage may be, it is advisable to get it fixed by scheduling for air conditioner repair in Frisco, TX. AC unit service and repair is important as excessive water leakage can be messy and frustrating. Also, if water continues to leak, it can lower the performance of your AC unit drastically as well as its cooling effect.
Call K&S Heating and Air for Air Conditioner Repair in Frisco, TX
For quick AC repairs in Frisco, Texas get in touch with K&S Heating and Air. They have a team of experienced, knowledgeable and skilled technicians who can visit your home and check your unit thoroughly. Upon investigation, they can determine the underlying cause of AC water leakage and provide you with the best solution. They also provide air conditioning repair services in Dallas, McKinney, Allen and Garland.