The best way to control your home’s comfort level and energy bills is by installing a thermostat from a heating and air condition service in Richardson, TX.This small but significant device is used to tell the furnace and cooling system of an HVAC system when to turn it off or on.

Types of Thermostats

However, you may get confused if you are buying one since there are a variety of these units available in the market. Before choosing one, you need to determine whether it will work with your heating and cooling system.

Here are common units that you may come across:

• Manual Thermostats

These are also known as mechanical or non-programmable thermostats and needless to say, they are the most basic ones you can find in the market. As the name implies, you need to adjust manual thermostats by hand to turn your HVAC system on and off.

Ask a heating and air condition service in Richardson, TX to install it for you even if you think you can do it yourself. A manual thermostat may look simple, but shoddy installation can prevent it from working properly.

There are 2 types of manual thermostats you can ask a heating and air condition service in Richardson, TX to install for you:

1. Digital thermostat which comes with buttons.
2. Analog thermostat that comes with a dial

The only flaw in this unit is that it is not very accurate when it comes to controlling internal temperature.

• Programmable Thermostats

As the name implies, programmable thermostats can be programmed to maintain certain temperatures without the need for manual intervention. This saves energy which is only good for your bill.

Unlike their manual counterparts, programmable thermostats can be pre-programmed to tell the furnace when you want the temperature to drop or increase. Instead of doing it by hand or calling for someone who has used it before, you can just let it do the work for you.

All you need to do is set the temperature you like when you leave home and you will come back to toasty warm or cool rooms. Here is how this works. For example, if you leave your house by 9 am and come back by 7 pm, you can program your thermostat to automatically raise or lower the temperature to the one you want to come home to.

It can also be programmed to return automatically to comfortable temperatures after a while. Before opting for heating and air condition service in Richardson, TX, make sure you know what you are doing.

• Smart Thermostats

Smart thermostats are programmable and intuitive. These can connect to smart devices such as your phone or tablet so you can control the internal temperature without getting up. Though they may be a tad bit more expensive than the aforementioned units, they more than make up for it in features.

This includes touchscreen displays, air filter alerts, voice instructions, variety of programmable schedules and intuitive schedule learning. The last one means that you don’t have to program the thermostat every day to get the temperature you need. It will learn your needs and make automatic adjustments on its own.

While using a smart thermostat is not difficult, you should call a heating and air condition service in Richardson, TX for troubleshooting.

Ensure the Thermostat Can Work with your HVAC system

Before you choose a thermostat for your home, make sure that it is compatible with your current HVAC system. There are a number of things you and a provider of heating and air condition service in Richardson, TX can do to determine this. All you need to do is check whether it can work the voltage your HVAC system works on and the number of heating and cooling stages the system goes through.

While almost every tested model works on most heating and cooling systems, there are some exceptions to the rule. Some smart thermostats, for instance, may not be designed to work with older HVAC units.

Even a heating and air condition service in Richardson, TX may not be able to help you there so choose wisely. Plus, if your heating and cooling systems are separate, you may need to get separate thermostats for each system.

If you are replacing an old thermostat for a new one, check the wiring first so you can buy one with a similar circuit system. Most units that are programmable can work with two wires of low voltage but newer units may require a C or common wire. C-wires provide a continuous flow of electricity for displays and WIFI. If you are unsure about this, just consult with a heating and air condition service in Richardson, TX.

This wire is meant for smart thermostats but if you cannot find it, you can go for alternatives. You can ask the heating and air condition service in Richardson, TX to get a power extender or adapter which can work as well. Or you can just go for a thermostat that does not need a C-wire to work.

Whichever course of action you decide to take, hire a heating and air condition service in Richardson, TX. These devices can be quite technical and improper installation can put undue pressure on your expensive HVAC system. Just make sure that the thermostat is installed on an interior wall and well away from windows. Sunlight and direct draughts can distort readings which can increase your energy bill.

If you are in search of heating and air condition service in Richardson, TX who can help you choose and install a thermostat or HVAC system in your home, contact K&S Heating and Air. The business offers air quality solutions for both home and commercial business owners. The service is available 24 hours a day and all 7 days of the week so they can also take care of emergencies promptly. Call them today before that HVAC system is too far gone to be fixed!