Air Conditioner Installation in Farmers Branch, TX: A Task for the Real Professionals
When anyone decides to install a split unit AC in his home, thenhe should do well to realize that it is a really complicated task that should only be performed with the help of highly skilled experts who have a lot of experience in Air Conditioner Installation in Farmers Branch, TX. This is because it is only these people who will effectively make sure that your AC remains fully functional and also performs well, year after year.
If you try to do it on your own, the odds are that you will be liable to bungle up the whole procedure due to the intricacies involved in the operation, especially where split units are concerned. Let us see how an expert in Air Conditioner Installation in Farmers Branch, TX will go about installing just such an AC unit.
Installation of the outdoor condensing unit (In case of a split AC)
The outdoor unit of your all new double invertor split AC should always have up to 12 inches of clearance from the ground for optimum performance. Moreover, it should be installed in both an airy and a well ventilated area. It should also be placed far away from direct sunlight so that it functions well, day in day out. Lastly, it is of considerable importance for you to get the professionals responsible for Air Conditioner Installation in Farmers Branch, to thoroughly double-check all of the pipes and wires as well as their associated ducts to see that the same are both securely connected and there are no leakages or exposed wires as such.
This last is particularly important because a bare wire containing the power required to run your ac can be exceedingly dangerous, to say the least. And should you inadvertently touch the same, you may be instantly electrocuted! This is why you should ask the experts in Air Conditioner Installation in Farmers Branch, TX to thoroughly double check all electricity carrying wires and sockets before they leave.
Once the connections have been placed you have to make sure that the specialists you hire for the task of Air Conditioner Installation in Farmers Branch, TX have enough knowledge of masonry to be able lay a concrete pad that will act as a base for the external or outdoors unit of your split AC system.
This base has to be laid in such a way that it is more or less level with the ground. Moreover, this base or pad has to be high enough that the condensing unit will not be affected by inclement weather such as rain and sleet or even winter snows that could pile up the snow till it enters the unit. Even though it is extremely unlikely for you to use your AC during a chilly snow storm, but nevertheless it is important that the snow does not get inside the machine.
This will help prevent rusting and decay of the metal parts, overall. However, simply asking the professionals responsible for Air Conditioner Installation in Farmers Branch, TX to raise the platform should eliminate the need to periodically clean the area around the condensing unit.
Installation of the indoor unit
The experts at Air Conditioner Installation in Farmers Branch, TX will themselves seek the best place to install the indoors unit. They will ask for your advice, but it is generally considered best practice to allow them to do their work without let or hindrance. Always try and avoid any direct sunlight and/or heat sources in front of the indoor unit. As a rule, they always try and avoid all such locations where there might be a chance of a potential gas leakage.
They will make sure that the AC’s indoor unit has at least 6 inches or so of wide open space, in the surrounding area of the unit. Moreover, the unit itself has to be firmly mounted and should be placed around 7 feet above the floor of the room. However, this is an average setting and the experts at Air Conditioner Installation in Farmers Branch, TX will make the appropriate decision regarding the height of the unit. The unit has to be placed above windows and doors so that ambient sunlight does not get a chance to interfere with the airflow and thereby decrease the efficacy of the AC’s cooling capacity.
Apart from that the wall on which the AC is to be affixed your AC should be strong enough to be able to continuouslyhold the entire weight of the indoor unit. Sometimes the good people responsible Air Conditioner Installation in Farmers Branch, TX might need to affix a metal frame or wood structure to the wall for added support for the unit, so that it does not fall down from its mountings.
After that, holes have to be made in the wall itself, so that the ducts, wires and other pipes connecting the indoor and outdoor units are able pass freely though the walls. However, the holes have to be properly cemented shut so that no external air is able to make its way into the climate controlled room.
All the mounts and brackets usedfor the job have to be very sturdy so that they will be able to support the weight of the unit. If you are in any way dissatisfied with the mounts or find them too flimsy for the task at hand. Then you should immediately tell the people responsible for Air Conditioner Installation in Farmers Branch, TX to change them, forthwith.
If you have any questions with regard to your air conditioner’sinstallation, service and repairs then all you have to do is to call the well -tested and proven experts at https://kandsac.com. Rest assured that when it comes to Air Conditioner Installation in Farmers Branch, TX, they are one of the top outfits available.