Air Conditioning Unit: To Repair or to Replace? | Air Conditioner Repair in Dallas, TX

Air Conditioning Unit: To Repair or to Replace? | Air Conditioner Repair in Dallas, TX

How old is your air conditioning unit? Does it often have to be repaired? What about the bills; are they excessively high? In all these cases, you may require a replacement rather than a repair. As a rule of the thumb, if you’ve been using your unit for more than 8 years now, you should simply replace it then the next time it malfunctions or a component stops working abruptly rather than availing air conditioner repair in Dallas, TX. If the issue is as simple as cleaning the filters or ducts, then maybe you can squeeze some more life out of it, but otherwise repair the unit.

Our team that deals with air conditioner repair in Dallas, TX has put together the following guidelines so that you can reach a decision more easily. Should you still have any confusion or questions, you can always reach out to us, and we’ll let you know if you require an air conditioner repair in Dallas, TX or replacement after inspecting your unit.

The Benefits

AC Replacement in Dallas, TX

  • Cost Savings: Replacing your AC directly impacts your bills, bringing them down significantly. The exact percentages depend on the SEER rating.
  • Tax Incentives: Several tax incentives apply to new air conditioning units, allowing you to save around 30%.
  • Warranty: Every new unit is equipped with a warranty, valid for a particular time period. Generally, all repair costs are free during this time.
  • Air Quality: A new air conditioning unit controls humidity and temperature more effectively, reducing chances of mold growth. Plus, they also improve indoor air quality.

Air Conditioner Repair in Dallas, TX

  • Affordable: If a unit isn’t that old, air conditioner repair in Dallas, TX will probably more economical for you. Ask for repair quotes, and ensure they are 50% less than the value of your unit before you decide air conditioner repair in Dallas, TX.
  • Less Work: Generally, air conditioner repair in Dallas, TX involve less work than installing a brand-new unit.

Assessing the efficiency

An old unit can consume nearly 2 times more energy than a new one. These differences are so significant because older units run at a Seasonal Energy Efficiency Ratio or SEER of less than 10. This metric defines the required energy to produce a specific output. Previously the standard was 10 SEER, but the new limit is now 13 SEER. So even if you buy a low end cooling unit, the efficiency would still be higher than your current system.

A cooling unit rated at 13 SEER can help save on your bills by 30%. And a unit rated at 16 SEER increases your savings to more than 60%. Obviously, the latter option is more expensive, but it also allows you to qualify for tax credit which is around $3000 or so. Plus, you Amy also get to avail some local incentives.

Talk to our team dealing with air conditioner repair in Dallas, TX and we’ll do the math for you, helping you decide the best unit within your budget.

Inspecting the ductwork

Great, so you now have an air conditioning unit that has a rating of 13 SEER or higher. But unfortunately, your room still isn’t comfortably cool. This is because the central unit is only part of the system, and the duct network plays just an important role. According to our team handling air conditioner repair in Dallas, TX, 10% to 30% of air leakages because of flaws with the duct network.

So how do you detect if the problem lies with the ducts? K&S Heating and Air will run a quick duct leakage test and measure the amount of air which escapes form the system. Accordingly, we’ll suggest if you should replace or resort to air conditioner repair in Dallas, TX.

Depending on the results of the test, we may be able to identify and seal duct gaps. We can also replace the entire ductwork with insulated pipe or carry out other suitable improvements.

Sealing the house

Air leakages are also encountered because of problems with your windows, doors and other housing components. In all these cases, you neither need replacement nor air conditioner repair in Dallas, TX. Instead; you’ll have to resolve insulation issues within your house to ensure that your air conditioner works as desired.

We’ll inspect your house and note down the sources of air leakages and heat loss. We’ll then seal cracks and gaps, or improve wall insulation. Both these options can decrease your energy bills by 30%.

Factoring in the future

How long do you plan to stay in your current home? If you’re about to move in the next few months, then air conditioner repair in Dallas, TX should be a better option for you.

If you choose replacement

So what did you decide: replacement or air conditioner repair in Dallas, TX? If you’ve chosen replacement, then ensure that you buy an appropriately sized unit.

The power or capacity of an air conditioning unit is measured by ton, defined as the cooling power produced by an ice block that weighs a ton and melts in 24 hours. Traditionally, 1 ton is deemed to be enough for every area spanning over 400 to 600 square feet. But in many a cases, 1 ton system may be bigger for the space. Obviously the upfront costs are greater in such a case. Another concern is the fact that bigger air conditioning unit heats a room quickly, implying greater frequencies of on-off cycles and worn out components.

So if you are going with replacement, choose a unit rated at an appropriate capacity. K&S Heating and Air determines this through software programs which require certain parameters to be inputted such as insulation thickness, attic configuration and building orientation towards the sun.


K&S Heating and Air is your one stop shop for all your heating and cooling needs. We deal with AC installation, replacement, repair, maintenance and other services.