Living with and sharing your home with a number of people has its benefits, but it also has drawbacks. One such drawback may be to compromise on the heating and ac in Dallas, TX which might satisfy only a handful of people while the rest have to make do with being uncomfortable. This can be because some of the household residents might prefer the house to be warmer while others might prefer it to be cooler. It is in such a situation related to heating and ac in Dallas, TX that zoning might help you out.

What is zoned heating and cooling?

Getting the heating and ac in Dallas, TX zoned at your home means providing individual temperature control for each of the divided zones in your house or any other place. For instance, since the kitchen is usually prone to heating up in the summer, you can keep the temperature lower there, while the temperature in the living room remains relatively high.

It is typical to divide the house into zones where the needs of heating and ac in Dallas, TX are alike. Modulating dampers that are controlled electronically and electronic thermostats are what adjust the temperate in each zone automatically.

Although you may not find zoning to have an impact on the efficiency of systems of heating and ac in Dallas, TX, it does make an efficient use of those systems.

Reasons to get zoning

1.    You need precise control of temperature in each room of the house

As with zoned heating and ac in Dallas, TX, each of the separate zones in your house has its own thermostat that enables setting them to a different temperature. This is helpful if you want to precisely control the temperature in each zone where zones may be divided in accordance with the different rooms of the house.

2.    Your house has rooms that are not in use yet still receive heating and cooling

It is particularly a case with a large house space with few inhabitants that you might find rooms that are not occupied. It may also be that these unoccupied rooms get heating and ac in Dallas, TX even though no one uses it. It is in this case that you might want to consider zoning so that the vacant part of the house may be excluded as not to waste heating and cooling on it.

3.    You need all areas of the house to be comfortable

People sharing a house may have different heating and cooling needs. If they compromise on the temperature, you might find some areas to receive more cooling or heating than the others or less cooling than the others. Whatever might be the case, this may only satisfy the needs of a handful of people while others might not be as comfortable.

4.    Zoning can save up to 30% off on your heating and cooling expenses

On average, zoning your systems can save you up to 30% on your energy bill.

Things required for installing zoning to an existing system

1.    Zone control panel

For the purpose of communication between dampers, thermostats, and heating, ventilation and air conditioning (HVAC) equipment, you will need a central control called the zone control panel. The intelligence of the whole zoning application, it is mounted by your equipment.

2.    Thermostats

In order to read the air temperature in each of the zones in your house you will need thermostats. Depending on whether you want more heating and ac in Dallas, TX or less at a specific zone in the house, the thermostat sends a signal to the control panel to adjust the temperature of the zone accordingly.  For example, if you want more cooling, it will send cool air and if you want more heating, it will send warm air.

3.    Zone dampers

Placed in ducts, dampers control the flow of air in certain zones of your house. They open and close automatically depending on which thermostat calls and are wired to a particular zone on the control panel that is managed by a particular thermostat in the house.

Advantages of zoning

1.    Tends to different needs of comfort

With zoned heating and ac in Dallas, TX, the residents of a household have much more control over the warmth and cooling of different rooms. Without zoning, the entire house is set to the same temperature that might be suitable for some but not others. While with zoning, people can set their rooms to different temperatures suitable for them.

2.    Can save energy

Zoned heating and ac in Dallas, TX can save you the extra energy that might be wasted in heating and cooling areas of the house where it is not needed, that are not occupied or not in use. These areas might not need the heating and cooling as much as others and can save you money on bills.

3.    Provides convenience

With zoning you might not need to walk around the house to adjust temperatures. There may be remote controls with which you operate the system from any location of the room the thermostat is present. These remotes might also consist of fan controls or maybe humidity controls depending on the system’s complexity.

Disadvantages of zoning

1.    Installation can cost you more money

As there is increased utilization of equipment and a much complicated duct system to be installed, zoning can add to your installation costs. Even if you are converting an existing system, zoning can cost you money. For getting the customized heating and ac in Dallas, TX for different parts of the house, you will have to pay more money.

2.    You will require more parts for the system

Increased moving parts and breaking down of equipment might be required to get your house zoned. Not to mention, if a part malfunctions it may have an overall impact on the system.

Summary

We learned about zoned heating and cooling, its advantages and disadvantages, the reasons for which one might have it installed, as well as things required for its installation into an existing system.

If you are considering getting zoned air conditioning in your home at Dallas, TX, K&S Heating & Air might be able to help you out.