One of the first things that a heating and air condition service in Garland, TX will tell you when you consult them is to check your thermostat. That is the one crucial piece of HVAC equipment that is controlling how comfortable your home’s internal temperature is.
Types of Thermostats
If you are looking for a replacement or need a heating and air condition service in Garland, TX to install a brand new system and thermostat, here are some options you can look into:
As the name implies, a non-programmable thermostat cannot be tampered with. It only has a single LED display that shows the temperature the heating and AC system is set at. There is also a button to increase or decrease the temperature and to turn it off.
This thermostat is ideal for home owners who want to have complete control over their energy expenditure and don’t mind waiting for your house to get comfortable. A reliable heating and air condition service in Garland, TX will be able to recommend a unit you can be satisfied with.
If on the other hand you don’t want to keep pestering the heating and air condition service in Garland, TX to tell you how to use the thermostat, you should go for the programmable option. You will make your life easier since these can be pre-set for different times of the day. That way you can come home to a cozy or cool home as and when you need it.
There are a number of different models you can choose from depending on usage. Some can be set for different times of the day while others can be set for 24 hours.
Touch screen Thermostat
As the name implies, a touch screen thermostat does not come with buttons which can be a pain to clean. Plus, it also prevents users from pressing buttons they don’t mean to which can be quite annoying at times especially when you are shivering from the cold!
Since everything can be accessed from the touch screen display, most of these thermostats don’t come with confusing manuals. You can access anything you need just by touching the screen. This is way faster than programming a unit manually using the manual that came with it. However, even though these units are quite convenient, they may be frustrating to operate if you have thick fingers. Plus, some have overly complicated interfaces that can take time to master. A heating and air condition service in Garland, TX will be able to tell you which one you should get.
If you want a HVAC system installed by a heating and air condition service in Garland, TX that gives you complete access irrespective of your location, you need a wireless thermostat. These can be controlled remotely via a smart device so you can control how much energy your family is using even when you are not there to supervise.
A wireless unit can also help you save money on your gas and electricity bills since it will break-in on established values that are set in the system. In other words, you won’t have to keep the HVAC on full blast 24/7 so you could come home to a chilled or warm home. The unit will do that for you right before you return which will make a marked difference in your energy bill.
Determine the Type of HVAC System You Have
Before looking for a thermostat that can suit your HVAC system, have a heating and air condition service in Garland, TX determine what kind you have. Determining this beforehand is important especially if you do not have any technical expertise in the area. Plus, there are so many types of systems available in the market that deciding which one will suit your needs can be a challenge.
Not all HVAC systems are made alike after all. A system that is powered by gas will need a different thermostat than one that functions via a heat pump based system. Based on the system you have and according to a reliable heating and air condition service in Garland, TX there are basically 3 different thermostats that you can choose from:
- Systems that run on low voltage or just need a 24v supply can work with almost any thermostat.
- HVAC systems that are connected to a direct line or high voltage (almost 240v source) need special thermostats to work. In some cases, the units that regulate the systems may also need to be connected to the same high voltage power source.
- Systems that run on 24 millivolts are usually powered by furnaces that run on gas or oil so they don’t need thermostats as such.
Besides this, you also need to determine the stages your system works at. If you are not technically sound, you will need a heating and air condition service in Garland, TX to look into this. If the system is stage 1 that means the system you have either works 24/7 at full blast or not at all and stage 2 or multi-stage systems can cool and heat at variable speeds.
Whatever you do, do not try and check this out for yourself. It usually involves a look inside the thermostat but since it is connected directly to a power source, you should let the professionals look into it for you.
Speaking of professionals, if you are in search of a heating and air condition service in Garland, TX, then look no further than K&S Heating and Air. They offer a complete lineup of services that can make your HVAC system run smoothly. No task is too complex or small for them to handle whether it is based in a home or in an office. Give them a call for a consultation today by dialing 972-271-9319. They are available for 24 hours a day and all 7 days of the week for emergencies as well.