Photo By Halfpoint at istock
The summers in Rockwall, TX can get unbearably hot, and as the heat rages, so does the need for quality AC repair. In fact, both heating and air conditioning service is always in demand, and when your unit breaks, there comes the time to either fix it or have it replaced. The service professionals at K&S of Rockwall, TX can help.
It is a known fact that any ordinary HVAC system has a typical lifespan of up to ten years. Anything after that should be replaced as soon as possible, as things can slowly go wrong with it. In any case where the total cost of repairs exceeds the actual value of your HVAC unit, saving for a new one may be the best investment.
Regular heating and air conditioning service is vital to the life of your system. This should include a seasonal inspection of the entire unit to check for dirty air filters, as they can trap a lot more than just dirty air particles. In fact, if you happen to live in an urban area with a lot of road traffic, the pollution can get into the filters easily, thus making it necessary for them to be changed more frequently.
Another important aspect of routine heating and air conditioning service is to have your freon level checked. Freon, or refrigerant, is the one liquid that keeps the AC part of your unit going. In fact, it is the very reason that your AC can effectively do the job of keeping your home cool in the middle of the summer months.
Freon is the gas that is most commonly used with most air conditioning systems. In fact, freon undergoes a conversion process several times in order to effectively cool off your home. Freon is a gas that gets converted into a liquid through a special heating process through the compressor. It then hits the coils, where it undergoes a cooling process right before going through the evaporators, where it becomes a gas again. This is the treatment process that allows the freon the time it needs to help keep your home cool during the intense summer heat.
Since the conversion process uses a lot of energy, it also uses a lot of the freon gas, which can eventually lead to a shortage. This is why it becomes important to have the freon levels checked when going for routine heating and air conditioning service, as this shortage can affect the air conditioner’s ability to keep your home cool. Plus, factor in any type of a leak, no matter how small it may be, and you may be looking at needing to get your AC repaired as soon as possible. Fortunately, this is something that your heating and air conditioning service provider can do for you at your request.
Evaporator coils are one of the most important parts of your heating and AC system. They are the pieces that transfer the heat which comes from the inside of your home to the outdoors, which is the first major step in maintaining a good climate within. Keeping them clean as part of heating and air conditioning service is critical to helping your cooling system run smoothly.
Evaporator coils have one thing in common with air filters. They have the capacity to become vulnerable to dirt and debris, which get collected from the outside and form a layer within the coils. This coating of dirt can affect their ability to keep your home cool by greatly impacting the ability of the heat transfer process, which results in more energy being spent just to keep your home cool.
Believe it or not, there is a connection between your AC’s air filter and your evaporator coils. Keeping a clean air filter is essential to having clean coils, as any dirt that collects onto the filter can eventually leak onto your coils as well. Getting your air filter changed should be done right before having your evaporator coils professionally cleaned, and that is something that your heating and air conditioning service specialist can do upon your request.
Heating is another issue, and just like your AC system, your heating also benefits well from routine maintenance. Failure to do so may result in the need for costly repairs down the road, which can be avoided with an annual inspection right before the winter months hit.
The average lifespan for most heating units runs anywhere from ten to twelve years, but with good, quality routine maintenance, it is possible to extend that lifespan even further. Routine maintenance should include a thorough inspection of your unit, including checking the air filters and system tune-ups, along with cleaning out the duct work when needed.
A comprehensive heating tune-up should include having the entire unit checked for cracks or dents, cleaning the outside of the unit and the fans, plus the coils. Every part in the motor should be cleaned and lubricated so that your unit is running at optimal level throughout the harsh winter months. Living without heat in the cold climate is no fun for anyone, so getting these basic tasks done by a heating and air conditioning service technician is vital to the life of your unit.
Testing your entire unit may also be critical. Units that run on either gas or fuel should have those levels checked on an annual basis. Testing the quality of the airflow and checking thermostat controls for efficiency should also be done as part of the process.
Routine heating and air conditioning service is vital to the life of your unit. Keeping a steady, consistent climate within can be the antidote to dealing with changes in the weather. Routine tune-ups and other basic maintenance tasks can keep your unit up and running strong in the years to come. Your service technician should be able to answer your questions and give you an honest estimate of service costs. All you need to do is call or visit K&S Heating and Air online today.